|
Technical Information |
SHIELDTEX Sdn.Bhd. |
|
Specification
as |
|
1. |
Dimension | X-Small | Small | Medium | Large | |
| Width | 70+/-10mm | 80+/-10mm | 95+/-10mm | 110+/-10mm | ||
| Length | Min 230mm | Min 230mm | Min 230mm | Min 230mm | ||
| Thickness | Min 0.08mm | Min 0.08mm | Min 0.08mm | Min 0.08mm | ||
| (Single wall) at palm and finger |
||||||
| Note: Measurement Locations |
| Width | : at level between base of index finger and base of thumb. | |
| Length | : from tip of second finger to outside edge of cuff. | |
| Thickness at palm | : at center of palm, 33 +/- 5mm from base of second finger. | |
| Thickness at
finger
|
: at center of
second finger, 33 +/- 3mm from the tip.
|
|
2. |
Physical | Before Aging | After Aging |
| Tensile strength | Min 21 Mp a | Min 16 Mp a | |
| Ultimate Elongation | Min 700% | Min 500 % | |
| Note: Accelerated
aging at 100 +/- 2 deg. C for 22 +/- 0.3 hours.
|
|||
|
3. |
Watertight Test Procedure |
| Fill glove with 1000 ml water at room temperature. | |
| Maintain at vertical position for minimum 2 minutes. | |
| Observe for leaks, Emergence
of water from glove constitutes a watertight failure
|
|
4. |
Sterilisation (for sterile latex examination gloves only) |
| By Gamma irradiation, minimum dose 25 kgy. |
| Shieldtex Sdn. Bhd. | |
|
Address: |
Lot 7, Jalan Lada Sulah 16/11 Selangor DE, Malaysia. |
|
Tel: |
603-55101228, 55101220, 55101208 |
|
Fax: |
603-55108333 |
|
Email: |
shieldtx@streamyx.com |
|
Contact |
Ms Kathleen Tay Mr. Alan Tay Ms Bee S Tan |
|
|